我們是專業的John Deere約翰迪爾強鹿柴油機平衡器軸襯套的測量與標準值參數供應服務商.我們可提供John Deere約翰迪爾強鹿柴油機平衡器軸襯套的測量與標準值參數銷售維修保養零配件服務.John Deere約翰迪爾強鹿柴油機平衡器軸襯套的測量與標準值參數想要更多的類型，請現在聯系湖南英珀威機械有限公司！
John Deere約翰迪爾強鹿柴油機平衡器軸襯套的測量與標準值參數
詳細描述
John Deere約翰迪爾強鹿柴油機平衡器軸襯套的測量與標準值參數
1. Visually inspect and measure balancer shaft bushing ID with bushing removed (A) and with bushing installed(B).If bushing is worn or not within specification, install new bushings. (See REMOVE AND INSTALL
BALANCER SHAFT BUSHINGS in Group 050.)
2. If necessary to replace bushing, remove bushing and measure bore diameter in block. If bore diameter in block is not within specification, install a new cylinder block.
Specification
Balancer Shaft Bore in Block(Bushing Removed)—ID 43.262—43.288 mm (1.7032—1.7042 in.)
Balancer Shaft Bushing—ID 40.177—40.237 mm (1.5818—1.5841 in.)
Balancer Shaft
Journal-to-Bushing—Clearance 0.016—0.102 mm (0.0006—0.0040 in.)
